PCB Cutting Tools
diamond router, chip breaker router and drill bit.
Material: tungsten carbide
1. Suitable for processing standard printed circuit boards.
2. Coating router and drill suitable for printed circuit board, copper, copper alloy, thick copper, copper substrate and iron plate.
3. Especially for FPC&PTFE with 3.175mm shank diameter
4. Suitable for package substrate with 2.0mm shank diameter
5. Suitable for new drilling machines with high-speed spindles with 2.0mm shank diameter.
End Type
Following standard size in stock (updraft) :
Serives
Test Center
diamond router, chip breaker router and drill bit.
Material: tungsten carbide
1. Suitable for processing standard printed circuit boards.
2. Coating router and drill suitable for printed circuit board, copper, copper alloy, thick copper, copper substrate and iron plate.
3. Especially for FPC&PTFE with 3.175mm shank diameter
4. Suitable for package substrate with 2.0mm shank diameter
5. Suitable for new drilling machines with high-speed spindles with 2.0mm shank diameter.
End Type
Following standard size in stock (updraft) :
cutting edge diameter(mm) | cutting edge length (mm) | shank diameter(mm) | overall length(mm) |
0.8 | 6.0 | 3.175 | 38.1 |
0.9 | 6.0 | 3.175 | 38.1 |
1.0 | 7.0 | 3.175 | 38.1 |
1.1 | 7.0 | 3.175 | 38.1 |
1.2 | 8.0 | 3.175 | 38.1 |
1.3 | 8.0 | 3.175 | 38.1 |
1.4 | 8.0 | 3.175 | 38.1 |
1.5 | 8.0 | 3.175 | 38.1 |
1.6 | 8.0 | 3.175 | 38.1 |
1.7 | 8.0 | 3.175 | 38.1 |
1.8 | 9.0 | 3.175 | 38.1 |
1.9 | 9.0 | 3.175 | 38.1 |
2.0 | 10 | 3.175 | 38.1 |
2.4 | 10.5 | 3.175 | 38.1 |
2.5 | 10.5 | 3.175 | 38.1 |
Serives
Test Center